Flash Stock Rom on Huawei Ascend G600 U8950

Flash Stock Firmware on Huawei Ascend G600 U8950 : we give you all needed files to Flash Stock Rom on Huawei Ascend G600 U8950 and we discuss about errors of flashing Stock, custom Rom and we offer you possible solutions for those errors – see below the guide

in this guide, We use dload Method to Flash new Stock Firmware for your Huawei Ascend G600 U8950. to follow dload method, you need a Branded MIcro SD card. make sure that SD card is working perfectly.

Before Flash Stock Rom on Huawei Ascend G600 U8950 , you should know these things

You can do this if you want Go back to Custom Rom to Official Stock Rom or reinstall Stock Rom.
This Stock Rom has to be installed on Huawei Ascend G600 U8950 model only.
 Do this your own risk, If you do any wrong then phone will be damaged. If so, try again or contact us.
If you want to upgrade your Oppo Find X then you have to find upgraded Rom – marshmallow, Lollipop, nougat, pie .we provide only Official Rom

Install Stock Rom on Huawei Ascend G600 U8950


Requirement for Flashing Official Firmware/ ROM

Battery 50% +
Micro SD memory card
Stock Rom – Download

Increase RAM SIZE in my phone – Need Root


Step 1,

we recommend you to get full  backup before doing this.

Step 2,

Download Official Stock Rom For Huawei Ascend G600 U8950

  • Download Huawei Ascend G600 U8950 Stock Rom to Computer. use this link and choose right Stock Rom. (you can do this without computer)
  • No Update.app ? then Extract the downloaded file and find for update.app

Flash Stock Rom on Huawei

Step 3,

Go to SD card and create New Folder and rename it “Dload”

Flash Stock Rom on Huawei

Step 4,

  • Connect your phone to Computer
  • Now, Copy Downloaded Stock Rom and paste it to “SD card/Dload” Folder.

Step 5,

Step 6,

Start Flashing Stock Rom on Huawei Ascend G600 U8950

  • Now, Press Volume Up + Volume Down + Power key together for 8 seconds until appear update process. normally. update process take 5-10min to complete its job.

Flash Stock Rom on Huawei

Step 7,

  • Wait patiently till the flashing completes. It may vary from 5-15 minutes depending on the requirement. Do not press any button until it completes.
  • The device reboots once the update process is done, wait for the device to restart and it should work properly.

Flash Stock Rom on Huawei

Step 7,


Another way of installing Stock ROM on Huawei Ascend G600 U8950

Flash Stock Rom on Huawei

  1. Take your phone and Create a new folder on your micro SD and rename it to “dload”
  2. Now, Copy the Downloaded “UPDATE.APP” (Stock Rom) and past it to the dload folder on DS card,
  3. Final step is,  Go to Settings –> About Phone/Updater –> press “Local Update” to start the flash process.
  4. Now Choose the download file and device will be updated with stock ROM.


Errors and Solutions

phone not works after flashing

Give it to 5min because first boot is Slow. Remove the battery for 60 seconds then insert back. If not works then boot into recovery mood and wipe the data. If not works then Try to Find Rom from alternative source.

Huawei Ascend G600 U8950 stuck at Boot logo or Bootloop

Huawei stuck at Boot logo or Bootloop
Huawei stuck at Boot logo or Bootloop

Give it to 5min because first boot is Slow. Remove the battery for 60 seconds then insert back. If not works then boot into recovery mood and wipe the data. If not works then Try to Find Rom from alternative source.

Update failed’

Q : progress bar load to middle process but freez/stuck and then show me a message ‘update failed’

A : Use correct Stock Rom.. Use SD card to create dload.. 

I can’t Flash Stock Rom on Huawei Ascend G600 U8950

please try again with is guide. after done, problem persist  then leave a comment with error message. Had better give us Screenshot. (take a photo from other Device)

My phone keep/continuosly/auto restarting

  • It may be your phone case is pressing on it
  • That means your current Rom is Corrupted or damaged. Now you have to Install Stock Rom to ON your phone. use this post to Flash new Stock Rom. If you can, use different Rom.

Huawei cust fail Huawei Ascend G600 U8950

Huawei cust fail Huawei
Huawei cust fail Huawei

try to reset if you can’t then I think that you should find another Stock firmware and try from it However let it to start 15mins at least because this is first boot.After that if any Problem persists then Try to hard reset and do the Flash again. Or try this Tool

dload:update partition MBR failed

dload:update partition MBR failed Huawei
dload:update partition MBR failed

try to reset if you can’t then I think that you should find another Stock firmware and try from it However let it to start 15mins at least because this is first boot.After that if any Problem persists then Try to hard reset and do the Flash again. Or try this Tool

“writing ‘recovery’… FAILED (remote: size too large)” 

"writing 'recovery'... FAILED (remote: size too large)"  Huawei
“writing ‘recovery’… FAILED (remote: size too large)”

getting this error message because your flashing twrp on Oreo. Nougat and Oreo kernels have different partition structure than the previous versions of Android

After Flash Stock Rom, I can’t change the Language

Here are some instructions with pictures to change the language on your smartDevice from English to any language , Swedish,English, Portuguese, Romanian, Serbian, Bulgarian, Chinese (中文), Croatian, Hindi,  Telugu, Greek, Bengali , (日本語), Lithuanian,  Korean (한국어), Polish, Hebrew, Malay, Norwegian, Thai, Danish,  Turkish, Ukrainian, Vietnamese, Indonesian, Estonian, Japanese , Latvian, German,  Slovenian , Filipino,French, Russian, Catalan, Hungarian, Spanish,  Urdu, Italian, Spanish,  Finnish, Czech, etc Read More



If this Flashing Huawei phone guide line was help, then please share this guide line to Facebook and twitter. Help others to find out this guide line on Facebook. If you have an any doubt or any problem, don’t hesitate feel free to reply. After then we are able to help you as well as be sure to bookmark our site on your browser.