Flash Stock Rom on Huawei Ascend P6-U06
Flash Stock Firmware on Huawei Ascend P6-U06 : we give you all needed files to Flash Stock Rom on Huawei Ascend P6-U06 and we discuss about errors of flashing Stock, custom Rom and we offer you possible solutions for those errors – see below the guide
in this guide, We use dload Method to Flash new Stock Firmware for your Huawei Ascend P6-U06. to follow dload method, you need a Branded MIcro SD card. make sure that SD card is working perfectly.
Before Flash Stock Rom on Huawei Ascend P6-U06 , you should know these things
♥ You can do this if you want Go back to Custom Rom to Official Stock Rom or reinstall Stock Rom.
♥ This Stock Rom has to be installed on Huawei Ascend P6-U06 model only.
♥ Do this your own risk, If you do any wrong then phone will be damaged. If so, try again or contact us.
♥If you want to upgrade your Oppo Find X then you have to find upgraded Rom – marshmallow, Lollipop, nougat, pie .we provide only Official Rom
Install Stock Rom on Huawei Ascend P6-U06
Requirement for Flashing Official Firmware/ ROM
♦ Battery 50% +
♦ Micro SD memory card
♦ Stock Rom – Download
Increase RAM SIZE in my phone – Need Root
Step 1,
we recommend you to get full backup before doing this.
Step 2,
Download Official Stock Rom For Huawei Ascend P6-U06
- Download Huawei Ascend P6-U06 Stock Rom to Computer. use this link and choose right Stock Rom. (you can do this without computer)
- No Update.app ? then Extract the downloaded file and find for update.app
Step 3,
Go to SD card and create New Folder and rename it “Dload”
Step 4,
- Connect your phone to Computer
- Now, Copy Downloaded Stock Rom and paste it to “SD card/Dload” Folder.
Step 5,
- after copy, turn off your Huawei Ascend P6-U06 by pressing power key.
- Note– What is the Stock & Custom Rom? Firmware? Bootloader?
Step 6,
Start Flashing Stock Rom on Huawei Ascend P6-U06
- Now, Press Volume Up + Volume Down + Power key together for 8 seconds until appear update process. normally. update process take 5-10min to complete its job.
Step 7,
- Wait patiently till the flashing completes. It may vary from 5-15 minutes depending on the requirement. Do not press any button until it completes.
- The device reboots once the update process is done, wait for the device to restart and it should work properly.
Step 7,
- after completed Update process, your Huawei will reboot automatically. after then you can use your android Device.
- Congratulations, Now you successfully installed Stock Rom.
- Enable OTG in Huawei Ascend P6-U06 phone – Need Root
Another way of installing Stock ROM on Huawei Ascend P6-U06
- Take your phone and Create a new folder on your micro SD and rename it to “dload”
- Now, Copy the Downloaded “UPDATE.APP” (Stock Rom) and past it to the dload folder on DS card,
- Final step is, Go to Settings –> About Phone/Updater –> press “Local Update” to start the flash process.
- Now Choose the download file and device will be updated with stock ROM.
Errors and Solutions
phone not works after flashing
Give it to 5min because first boot is Slow. Remove the battery for 60 seconds then insert back. If not works then boot into recovery mood and wipe the data. If not works then Try to Find Rom from alternative source.
Huawei Ascend P6-U06 stuck at Boot logo or Bootloop
Give it to 5min because first boot is Slow. Remove the battery for 60 seconds then insert back. If not works then boot into recovery mood and wipe the data. If not works then Try to Find Rom from alternative source.
Update failed’
Q : progress bar load to middle process but freez/stuck and then show me a message ‘update failed’
A : Use correct Stock Rom.. Use SD card to create dload..
I can’t Flash Stock Rom on Huawei Ascend P6-U06
please try again with is guide. after done, problem persist then leave a comment with error message. Had better give us Screenshot. (take a photo from other Device)
My phone keep/continuosly/auto restarting
- It may be your phone case is pressing on it
- That means your current Rom is Corrupted or damaged. Now you have to Install Stock Rom to ON your phone. use this post to Flash new Stock Rom. If you can, use different Rom.
Huawei cust fail Huawei Ascend P6-U06
try to reset if you can’t then I think that you should find another Stock firmware and try from it However let it to start 15mins at least because this is first boot.After that if any Problem persists then Try to hard reset and do the Flash again. Or try this Tool
dload:update partition MBR failed
try to reset if you can’t then I think that you should find another Stock firmware and try from it However let it to start 15mins at least because this is first boot.After that if any Problem persists then Try to hard reset and do the Flash again. Or try this Tool
“writing ‘recovery’… FAILED (remote: size too large)”
getting this error message because your flashing twrp on Oreo. Nougat and Oreo kernels have different partition structure than the previous versions of Android
After Flash Stock Rom, I can’t change the Language
Here are some instructions with pictures to change the language on your smartDevice from English to any language , Swedish,English, Portuguese, Romanian, Serbian, Bulgarian, Chinese (中文), Croatian, Hindi, Telugu, Greek, Bengali , (日本語), Lithuanian, Korean (한국어), Polish, Hebrew, Malay, Norwegian, Thai, Danish, Turkish, Ukrainian, Vietnamese, Indonesian, Estonian, Japanese , Latvian, German, Slovenian , Filipino,French, Russian, Catalan, Hungarian, Spanish, Urdu, Italian, Spanish, Finnish, Czech, etc Read More
If this Flashing Huawei phone guide line was help, then please share this guide line to Facebook and twitter. Help others to find out this guide line on Facebook. If you have an any doubt or any problem, don’t hesitate feel free to reply. After then we are able to help you as well as be sure to bookmark our site on your browser.