Flash Stock Firmware on Oppo U701 Ulike

We use SP Flash tool but we also give you all possible and available Flashing methods and all available Stock firmwares to Flash Stock Firmware on Oppo U701 Ulike. Don’t worry If you really want to Flash a Rom to Unbrick, Rollback, Repair, unroot, full system restore then you are in right website. so Flash it. as wel, below the guide, we discuss about errors of flashing Custom / Stock Firmware and we offer you possible solutions for those errors.

you should know these things

♥ You can do this if you want Go back to Official Stock Firmware or reinstall Stock firmware.
♥ phone’s pc software does not want to install but phone driver must works on PC without error.
♥ This Stock Firmware has to be installed on this model only.
♥ Do this your own risk, If you do any wrong then phone will be damaged. If so, try again or contact us.
♥ SP Flash tool works on MTK Device only.. you had better check it first.. 
♥ If you want to upgrade your Oppo U701 Ulike. then you have to find upgraded Rom – marshmallow,Lollipop, kitkat .we provide only Official Rom

 

Install Stock Firmware on Oppo U701 Ulike.

 

Requirement for Flashing Official Firmware/ ROM

♦ driver must works on PC  USB drivers.
♦ Enable developer mood and USB Debugging
♦ Smart phone flash tool – link

Increase RAM SIZE in Oppo U701 Ulike. – Need Root

 

Step 1,

Download and install Oppo U701 Ulike. USB drivers after that, enable “Developer and Debugging mode“

Step 2,

Turn off your Oppo Device by pressing Power button.

Step 3,

Download Stock Firmware For Oppo U701 Ulike.

Download Oppo U701 Ulike.  Stock Firmware (please Find right Stock Firmware)

after that extract downloaded SP Flash tool. (to extract you will need this software). after extract open Flash tool by Clicking “Flash tool.exe”

11111

Step 4,

After open Flash tool. There is tab called Download. Click the “Download tab”

Install Stock Rom

Step 5,

after that, There is a button Called “Scatter-Loading”. Click it and locate the catter file. there is the catter file in the Stock Firmware folder. some thing like – “#### android catter.txt”

Install Stock Rom

Step 6,

Start Flashing Stock Firmware on Oppo U701 Ulike.

Final Step. Click the Download button to Begin Flash.

Flash Stock Rom

Now connect your Oppo Device to your PC or lap via data cable. after then, press Volume Up and Volume Down until the Oppo Device is detected by your PC. (without battery). after complete Flashing process, SP Flash tool indicate green right.

♥ Note–  What is the Stock & Custom Rom? Firmware? Bootloader?

Flash Stock Rom

Enable OTG in Oppo phone – Need Root

Step 7,

Now disconnect your phone from PC and insert the battery and switch on the phone. Congratulations, Now you successfully installed Stock Firmware.

Errors and Solutions

Oppo  phone not works after flashing

A : Give it to 5min. because first boot is slow. If not works, then flash it again please go step by step.

Oppo U701 Ulike. stuck at Boot logo or Bootloop

A: Git it to 5min because first boot is Slow. Remove the battery for 60 seconds then insert back. If not works then boot into recovery mood and wipe the data (Hard reset). If not works then Try again to install Stock Firmware.

automatically disconnecting during flashing Oppo phone 

  • please Try another data cable.
  • Try to install Drivers again
  • Try another Computer.

I can’t Flash Stock Firmware Oppo phone

please try again. after did, if does not works then leave a comment with error message.you Had better give us Screenshot. 

My phone keep restarting

  • It may be your Oppo U701 Ulike. case is pressing on it
  • May be, your current Rom is Corrupted or damaged. So you have to Install Stock Firmware to ON your phone. use this post to Flash new Stock Firmware. If you can, use different Rom.

PMT changed Error

  • Try to format your phone using Sp flash tool,
  • Find another Rom
  • If not works, then open the scatter file using windows Notepad+ and try to change __NODL_FAT to FAT by removing “__NODL_”

Other error messages and Solutions ..

  • Below we listed errors of SP Flash tool and there is a link to fix these errors.  Phone shows white screen,Sp Flash tool remains at 0%,Error 5054,Initialize scatter failed,Error 0X411,
  • B8038! Android download  pmt is ready and layout has been changedLED
  • BROM ERROR : S_FT_DOWNLOAD_FAIL (4008) - this is a encountered an error.
  • BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149) Sp can't Flash files. go to dedicated post below
  • BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168)
  • ROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054) go to dedicated post below
  • BROM
    ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail
  • BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007) go to dedicated post below
  • BROM ERROR: S_STORAGE_NOT_MATCH (3182) visit dedicated post below
  • BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP ERROR CODE: 0X00

If you face this kind of error message then this is the face for fix it. Go to this  dedicated post

So, If this Oppo phone Flashing guide line was help, then please share this guide line to facebook and twitter. Help others to find out this guide line on facebook. If you have an any doubt or any problem, don’t hesitate feel free to reply. After then we are able to help you as well as be sure to bookmark our site on your browser.