Flash Stock Rom on verykool CYPRUS PRO S6005X
We are going to use SP Flash tool but we also give you all possible Flashing methods and all available Stock firmware to your verykool CYPRUS PRO S6005X. Don’t worry If you really want to Flash a Rom to Unbrick, Rollback, Repair, unroot,full system restore then you are in right website. so Flash it. as wel, below the guide, we discuss about errors of flashing Custom / Stock Rom and we offer you possible solutions for those errors.
you should know these things
♥ You can do this if you want Go back to Official Stock Rom or reinstall Stock firmware.
♥ phone’s pc software does not want to install but phone driver must works on PC without error.
♥ This Stock Rom has to be installed on this model only.
♥ Do this your own risk, If you do any wrong then phone will be damaged. If so, try again or contact us.
♥ SP Flash tool works on MTK Device only.. you had better check it first..
♥ If you want to upgrade your verykool CYPRUS PRO S6005X then you have to find upgraded Rom – marshmallow,Lollipop, kitkat .we provide only Official Rom
Install Stock Rom on verykool CYPRUS PRO S6005X
Requirement for Flashing Official Firmware/ ROM
♦ USB drivers.
♦ Enable developer mood and USB Debugging
♦ Smart phone flash tool – link
Increase RAM SIZE in verykool CYPRUS PRO S6005X – Need Root
Step 1,
Note – we recommend you to get full backup before doing this.
Download and install verykool CYPRUS PRO S6005X USB drivers after that, enable “Developer and Debugging mood“
Step 2,
Turn off your Verykool phone phone by pressing Power button and remove the battery.
Step 3,
Download Official Stock Rom For verykool CYPRUS PRO S6005X
Download verykool CYPRUS PRO S6005X Stock Rom (please Find right Stock Rom)
after that extract downloaded SP Flash tool. (to extract you will need this software). after extract open Flash tool by Clicking “Flash tool.exe”
Step 4,
After open Flash tool. There is tab called Download. Click the “Download tab”
Step 5,
after that, There is a button Called “Scatter-Loading”. Click it and locate the catter file. there is the catter file in the Stock Rom folder. some thing like – “#### android catter.txt”
Step 6,
Start Flashing Stock Rom on verykool CYPRUS PRO S6005X
Final Step. Click the Download button to Begin Flash.
Now connect your Verykool phone phone to your PC or lap via data cable. after then, press Volume Up and Volume Down until the Verykool phone phone is detected by your PC. (without battery). after complete Flashing process, SP Flash tool indicate green right.
♥ Note– What is the Stock & Custom Rom? Firmware? Bootloader?
Enable OTG in Verykool phone – Need Root
Step 7,
Now disconnect your phone from PC and insert the battery and switch on the phone. Congratulations, Now you successfully installed Stock Rom.
Frequently ask error and solutions
Verykool phone not works after flashing
A : Give it to 5min. because first boot is slow. If not works, then flash it again please go step by step.
verykool CYPRUS PRO S6005X stuck at Boot logo or Bootloop
A: Git it to 5min because first boot is Slow. Remove the battery for 60 seconds then insert back. If not works then boot into recovery mood and wipe the data (Hard reset). If not works then Try again to install Stock Rom.
automatically disconnecting during flashing Verykool phone
Try another data cable.
Try to install Drivers again
Try another Computer.
I can’t Flash Stock Rom Verykool phone
please try again. after did, if does not works then leave a comment with error message.you Had better give us Screenshot.
My verykool CYPRUS PRO S6005X keep restarting
- It may be your verykool CYPRUS PRO S6005X case is pressing on it
- May be, your current Rom is Corrupted or damaged. So you have to Install Stock Rom to ON your phone. use this post to Flash new Stock Rom. If you can, use different Rom.
PMT changed Error
- Try to format your phone using Sp flash tool,
- Find another Rom
- If not works, then open the scatter file using windows Notepad+ and try to change __NODL_FAT to FAT by removing “__NODL_”
Other error messages and Solutions ..
Below we listed errors of SP Flash tool and there is a link to fix these errors. Phone shows white screen,Sp Flash tool remains at 0%,Error 5054,Initialize scatter failed,Error 0X411,
BROM ERROR:S_COM_PORT_OPEN Fail(1013)
BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007),
BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)
BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
ROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)
BROM ERROR: S_STORAGE_NOT_MATCH (3182),
B8038! Android download pmt is ready and layout has been changedLED
BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP ERROR CODE: 0X00,
BROM ERROR : S_FT_DOWNLOAD_FAIL (2004),
BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005),
BROM ERROR: S_FT_GET_MEMORY_FAIL (4058)
BROM ERROR: S_TIMEOUT (1042)
BROM
BROM ERROR : S_DA_SDMMC_WRITE_FAIError
BROM ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0)
BROM ERROR : S_FT_DA_NO_RESPONSE (0xFA1)
If you face this kind of error message then go to this dedicated post and Fix it
So, If this Verykool phone Flashing guide line was help, then please share this guide line to facebook and twitter. Help others to find out this guide line on facebook. If you have an any doubt or any problem, don’t hesitate feel free to reply. After then we are able to help you as well as be sure to bookmark our site on your browser.