How to Flash Stock Rom on Micromax Q3001
Flash Stock Firmware on Micromax Q3001: We use SP Flash tool but we also give you all possible and available Flashing methods and all available Stock firmwares to Flash Stock Rom on Micromax Q3001. Don’t worry If you really want to Flash a Rom to Unbrick, Rollback, Repair, unroot, full system restore then you are in right website. so Flash it. as well, below the guide, we discuss about errors of flashing Custom / Stock Rom and we offer you possible solutions for those errors. Note– What is the Stock & Custom Rom? Firmware? Bootloader?
you should know these things
♥ You can do this if you want Go back to Official Stock Rom or reinstall Stock firmware.
♥ phone’s pc software does not want to install but phone driver must works on PC without error.
♥ This Stock Rom has to be installed on this model only.
♥ Do this your own risk, If you do any wrong then phone will be damaged. If so, try again or contact us.
♥ SP Flash tool works on MTK Device only.. you had better check it first..
♥ If you want to upgrade your Micromax Q3001 then you have to find upgraded Rom – KitKat, Lollipop, Marshmallow,Nougat, Oreo, Pie. we provide only Official Rom
How to Install Stock Rom on Micromax Q3001
Requirement for Flashing Official Firmware/ ROM
♦ driver must works on PC
♦ Enable developer mode and USB Debugging – Link
♦ Smart phone flash tool – link
Read More – Increase RAM SIZE in Micromax Q3001
Step 1, (Optional)
Enable “Developer and Debugging mode“
Step 2,
Turn off your Micromax Device by pressing Power button.
Step 3,
Download Stock Rom For Micromax Q3001.
Download Micromax Q3001. Stock Rom (please Find right Stock Rom)
after that extract downloaded SP Flash tool. (to extract you will need this software). after extract open Flash tool by ClicSmart “Flash tool.exe”
Step 4,
After open Flash tool. There is tab called Download. Click the “Download tab”
Step 5,
after that, There is a button Called “Scatter-Loading”. Click it and locate the scatter file. there is the scatter file in the Stock Rom folder. some thing like – “#### android scatter.txt”
Step 6,
Start Flashing Stock Rom on Micromax Q3001.
Final Step. Click the Download button to Begin Flash.
Now connect your Micromax Device to your PC or lap via data cable. after then, press Volume Up and Volume Down until the Micromax Device is detected by your PC. (without battery). after complete Flashing process, SP Flash tool indicate green right.
♥ Note– What is the Stock & Custom Rom? Firmware? Bootloader?
Enable OTG in Micromax phone – Need Root
Step 7,
Now disconnect your phone from PC and insert the battery and switch on the phone. Congratulations, Now you successfully installed Stock Rom.
Errors and Solutions
Micromax phone not works after flashing
A : Give it to 5min. because first boot is slow. If not works, then flash it again please go step by step.
Micromax Q3001. stuck at Boot logo or Bootloop
A: Git it to 5min because first boot is Slow. Remove the battery for 60 seconds then insert back. If not works then boot into recovery mode and wipe the data (Hard reset). If not works then Try again to install Stock Rom.
automatically disconnecting during flashing Micromax phone
- please Try another data cable.
- Try to install Drivers again
- Try another Computer.
I can’t Flash Stock Rom Micromax phone
please try again. after did, if does not works then leave a comment with error message.you Had better give us Screenshot.
My Micromax phone keep restarting
- It may be your Micromax Q3001. case is pressing on it
- May be, your current Rom is Corrupted or damaged. So you have to Install Stock Rom to ON your phone. use this post to Flash new Stock Rom. If you can, use different Rom.
PMT changed Error
- Try to format your phone using Sp flash tool,
- Find another Rom
- If not works, then open the Scatter file using windows Notepad+ and try to change __NODL_FAT to FAT by removing “__NODL_”
Other error messages and Solutions ..
- Below we listed errors of SP Flash tool and there is a link to fix these errors. Phone shows white screen,Sp Flash tool remains at 0%,Error 5054,Initialize Scatter failed,Error 0X411,
B
8038! Android download pmt is ready and layout has been changedLED
BROM ERROR : S_FT_DOWNLOAD_FAIL (4008) - this is a encountered an error.
BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149) Sp can't Flash files. go to dedicated post below
BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168)
ROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054) go to dedicated post below
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail
BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007) go to dedicated post below
BROM ERROR: S_STORAGE_NOT_MATCH (3182) visit dedicated post below
BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP ERROR CODE: 0X00
If you face this kind of error message then this is the face for fix it. Go to this dedicated post
So, If this Micromax phone Flashing guide line was help, then please share this guide line to facebook and twitter. Help others to find out this guide line on facebook. If you have an any doubt or any problem, don’t hesitate feel free to reply. After then we are able to help you as well as be sure to bookmark our site on your browser.
How to Flash Stock Rom on Micromax Q3001
Flash Stock Firmware on Micromax Q3001: We use SP Flash tool but we also give you all possible and available Flashing methods and all available Stock firmwares to Flash Stock Rom on Micromax Q3001. Don’t worry If you really want to Flash a Rom to Unbrick, Rollback, Repair, unroot, full system restore then you are in right website. so Flash it. as well, below the guide, we discuss about errors of flashing Custom / Stock Rom and we offer you possible solutions for those errors. Note– What is the Stock & Custom Rom? Firmware? Bootloader?
you should know these things
♥ You can do this if you want Go back to Official Stock Rom or reinstall Stock firmware.
♥ phone’s pc software does not want to install but phone driver must works on PC without error.
♥ This Stock Rom has to be installed on this model only.
♥ Do this your own risk, If you do any wrong then phone will be damaged. If so, try again or contact us.
♥ SP Flash tool works on MTK Device only.. you had better check it first..
♥ If you want to upgrade your Micromax Q3001 then you have to find upgraded Rom – KitKat, Lollipop, Marshmallow,Nougat, Oreo, Pie. we provide only Official Rom
How to Install Stock Rom on Micromax Q3001
Requirement for Flashing Official Firmware/ ROM
♦ driver must works on PC
♦ Enable developer mode and USB Debugging – Link
♦ Smart phone flash tool – link
Read More – Increase RAM SIZE in Micromax Q3001
Step 1, (Optional)
Enable “Developer and Debugging mode“
Step 2,
Turn off your Micromax Device by pressing Power button.
Step 3,
Download Stock Rom For Micromax Q3001.
Download Micromax Q3001. Stock Rom (please Find right Stock Rom)
after that extract downloaded SP Flash tool. (to extract you will need this software). after extract open Flash tool by ClicSmart “Flash tool.exe”
Step 4,
After open Flash tool. There is tab called Download. Click the “Download tab”
Step 5,
after that, There is a button Called “Scatter-Loading”. Click it and locate the scatter file. there is the scatter file in the Stock Rom folder. some thing like – “#### android scatter.txt”
Step 6,
Start Flashing Stock Rom on Micromax Q3001.
Final Step. Click the Download button to Begin Flash.
Now connect your Micromax Device to your PC or lap via data cable. after then, press Volume Up and Volume Down until the Micromax Device is detected by your PC. (without battery). after complete Flashing process, SP Flash tool indicate green right.
♥ Note– What is the Stock & Custom Rom? Firmware? Bootloader?
Enable OTG in Micromax phone – Need Root
Step 7,
Now disconnect your phone from PC and insert the battery and switch on the phone. Congratulations, Now you successfully installed Stock Rom.
Errors and Solutions
Micromax phone not works after flashing
A : Give it to 5min. because first boot is slow. If not works, then flash it again please go step by step.
Micromax Q3001. stuck at Boot logo or Bootloop
A: Git it to 5min because first boot is Slow. Remove the battery for 60 seconds then insert back. If not works then boot into recovery mode and wipe the data (Hard reset). If not works then Try again to install Stock Rom.
automatically disconnecting during flashing Micromax phone
- please Try another data cable.
- Try to install Drivers again
- Try another Computer.
I can’t Flash Stock Rom Micromax phone
please try again. after did, if does not works then leave a comment with error message.you Had better give us Screenshot.
My Micromax phone keep restarting
- It may be your Micromax Q3001. case is pressing on it
- May be, your current Rom is Corrupted or damaged. So you have to Install Stock Rom to ON your phone. use this post to Flash new Stock Rom. If you can, use different Rom.
PMT changed Error
- Try to format your phone using Sp flash tool,
- Find another Rom
- If not works, then open the Scatter file using windows Notepad+ and try to change __NODL_FAT to FAT by removing “__NODL_”
Other error messages and Solutions ..
- Below we listed errors of SP Flash tool and there is a link to fix these errors. Phone shows white screen,Sp Flash tool remains at 0%,Error 5054,Initialize Scatter failed,Error 0X411,
B
8038! Android download pmt is ready and layout has been changedLED
BROM ERROR : S_FT_DOWNLOAD_FAIL (4008) - this is a encountered an error.
BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149) Sp can't Flash files. go to dedicated post below
BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168)
ROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054) go to dedicated post below
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail
BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007) go to dedicated post below
BROM ERROR: S_STORAGE_NOT_MATCH (3182) visit dedicated post below
BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP ERROR CODE: 0X00
If you face this kind of error message then this is the face for fix it. Go to this dedicated post
So, If this Micromax phone Flashing guide line was help, then please share this guide line to facebook and twitter. Help others to find out this guide line on facebook. If you have an any doubt or any problem, don’t hesitate feel free to reply. After then we are able to help you as well as be sure to bookmark our site on your browser.